KEY FEATURES
No, the Stratos AL range has sheathed cable routing. Which means Cables run underneath a polyurethane sheath on the downtube, which hides the cables but can still be removed for ease of maintenance.
3 Years
No, drilling wholes in your frame will void your warranty.
Stratos uses headset bearings in the main pivot. These are Token C83-TBT bearings. Contact your local Silverback distributor for more info.
Intermittent cleaning is the only maintenace IGUS bushings require. Ensure they are dry and clean of dust with a paper towel. Do not grease IGUS bushings since this will attract dust - IGUS bushings are self-lubricating and do not need to be greased.
Aluminium has a limited fatigue life, meaning that it will always fatigue eventually. By using a bearing at the rear pivot instead of relying on frame flex, we can greatly extend the life of your frame. Since carbon fiber can be designed for indefinite fatigue life, we can be confident that Stratos CF will not fail by fatigue.
No. The entire Stratos range is designed with wide range 1x drivetrains in mind. This allows for wider bearing stances and a stiffer frame.
BURST Pivot is the XC/Light Trail implementation of our popular BURST platforms. It combines great pedaling performance with a progressive end stroke to create a platform that reacts intuitively to different circumstances. Large bearings in the seatstay mounted pivots, near the dropouts, ensure a good service life.
The massive main pivot uses angular contact headset bearings, with the larger 52mm bearing used on the drive side to cope with the additional chain forces. The angular contact design allows for bearing wear to be tightened out - the same as would be done at the headtube.
Asymmetric tubes allow for the dispersion of shock forces between the top tube and downtube. At the riding sag point most of the shock forces are directed along the top tube. At suspension bottom-out, the rear shock rotates and shock forces are split between the top tube and downtube via the single sided support strut.
BURST Pivot is the XC/Light Trail implementation of our popular BURST platforms. It combines great pedaling performance with a progressive endstroke to create a platform that reacts intuitively to different circumstances. Large bearings in the seatstay mounted pivots, near the dropouts, ensure a good service life.
With dropper posts becoming standard on all disciplines of mountain biking, this was a no-brainer; what's more interesting is where this technology is headed. Stratos can accomodate much longer droppers, giving the rider more options and freedom of movement.
Metric shocks perform better and have optional bearing hardware for low friction rotation, supported on the rocker side.
As modern XCO and XCM courses become more technical, we've adapted the bikes to suit not only the current trails, but also where XC is headed. Slacker head angles and longer wheelbases, along with other geometry and suspension tweaks allow for a bike that is more capable and forgiving on the downhills, but does not sacrifice any uphill ability in the process. Stratos AL has 120mm travel and has some geometry changes that give a slightly more relaxed ride that its carbon fibre counterpart, aimed at riders looking to spend longer days in the saddle or dabble in trail riding.
All the looks of internal cable routing, but without the hassle. Cables run underneath a polyurethane sheath on the downtube, which hides the cables but can still be removed for ease of maintenance.
Get the great looks and smooth lines of carbon fibre, without the cost implications.
The massive main pivot uses angular contact headset bearings, with the larger 52mm bearing used on the drive side to cope with the additional chain forces. The angular contact design allows for bearing wear to be tightened out - the same as would be done at the headtube.
When is comes to water bottles, two is definitely better than one.
| Crankset | SRAM NX Eagle, DUB, 32t |
| Cassette | SRAM PG1230 Eagle 11-50T |
| Rear Der | SRAM NX 12spd Eagle |
| Shifters | NX Eagle Trigger shifter |
| Bottom Bracket | DUB BSA MTB73 |
| Fork | Rockshox Reba MOTION CONTROL RL Crown Adjust, 29" BOOST 15X110mm SOLO AIR 120mm |
| Rear shock | RS DELUXE RT 210X47.5 DEBONAIR 2 TOKENS MM TUNE 320 LB LOCKOUT |
| Hubs | Sealed bearing hubs |
| Rims | Stan's Crest S1, 29", 32H |
| Tyres | Front: Maxxis Forekaster 120TPi 29x2.35 EXO TR / Rear: Maxxis Rekon Race 20TPi 29x2.35 EXO TR |
| Seatpost | Surface Dropper Post, 125mm S, 150mm M/L/XL |
| Saddle | Surface Race, Cr-Mo Rails |
| Handlebar | Surface Alloy Butted, 31.8mm, 9deg backsweep, 5deg rise, 780mm width |
| Stem | Surface Alloy 6deg rise, 45mm S/M, 55mm L/XL |
| Frame | New Stratos asymmetric Hydro formed 6061 Alloy. 120mm travel, Boost 148mm. tapered headtube. |
| Brake set | Shimano MT500 Hydraulic Disc brakes, 180mm F / 160mm R |
| Weight | 14.21kg |
| Weight Limit | 110kg - combined weight of bike and rider (including all kit) |
| Travel | 120mm |
Disclaimer: Due to the nature of bike manufacturing, specification, finishes and price may be subject to change without prior written notification.
Disclaimer: Due to Covid-related scheduling and component availability challenges, bike specifications are subject to change without notice. Specifications may not be exactly what is shown in the photo.
| map | type(mm unless specified) | S | M | L | XL |
|---|---|---|---|---|---|
| Rider height(cm) | 154-170 | 168-180 | 178-192 | 188-200 | |
| Rider inseam(cm) | 70-77 | 76-81 | 80-87 | 85-90 | |
| A | Seat tube c/t | 390 | 430 | 480 | 510 |
| B | Seat tube angle | 76 | 76 | 76 | 76 |
| C | Head tube angle | 66 | 66 | 66 | 66 |
| D | Top Tube | 572 | 594 | 617 | 639 |
| E | Reach | 425 | 445 | 465 | 485 |
| F | Chainstay length | 435 | 435 | 435 | 435 |
| G | bb height | 340 | 340 | 340 | 340 |
| H | head tube length | 90 | 100 | 110 | 120 |
| I | stack | 589 | 599 | 608 | 617 |
| J | standover | 775 | 777 | 780 | 795 |
| K | Wheelbase | 1144 | 1168 | 1192 | 1216 |
FROM THE CITY OF INNOVATION STUTTGART, GERMANY
WE CARE ABOUT YOUR CULTURE
PRESERVE THE PLANET WITH SILVERBACK BIKES
