The Foundation of Every Reliable Tubeless Setup – Schwalbe Tubeless Rim Tape

Going tubeless is one of the best upgrades you can make to any bike. Lower pressures, better traction, self-sealing punctures, and no more pinch flats. But the quality of your tubeless setup is only as good as the rim tape underneath it. The Schwalbe Tubeless Rim Tape is the professional-grade foundation that makes the difference between a tubeless setup that holds air reliably for months and one that slowly seeps and frustrates.

Engineered specifically for tubeless use, Schwalbe’s rim tape is rated to 12 bar (174 psi) — high enough for road racing applications where a single layer is sufficient. The 32mm width covers most MTB and gravel rims cleanly, and the 10m roll gives you enough tape for multiple wheel builds. Easy to apply, airtight, and built to last.

Key Features

High-pressure rated to 12 bar (174 psi): Suitable for road, gravel, and MTB. Even for road racing, a single layer is sufficient — no double-taping required.
32mm width: Covers the internal width of most MTB and gravel rims cleanly, with enough overlap onto the rim walls to create a reliable airtight seal.
10m roll: Enough tape for approximately 5–6 wheel builds — excellent value for workshops and riders who build multiple wheels.
Extremely easy to apply: Conforms easily to the rim profile, adheres firmly without bubbles, and is straightforward to apply even for first-time tubeless builders.
Single layer sufficient for road: Holds a reliable seal with a single layer — saving time and reducing the risk of valve fitment issues.
Compatible with all tubeless-ready rims: Suitable for road, MTB, gravel, and e-bike wheels. Works with all tubeless valves and sealants.

Specifications

Brand: Schwalbe
Type: Tubeless rim tape (Felgenband Tubeless)
Width: 32 mm
Length: 10 m
Max. pressure: 12 bar (174 psi)
Weight: 90 g
Color: Blue
Includes: 1 x 10m roll
Manufacturer article number: 887032
EAN: 4026495849258

Frequently Asked Questions (FAQ)

What width of rim tape do I need for my wheels?

The tape should cover the entire rim bed and overlap slightly onto the rim walls. For most MTB rims with an internal width of 25–30mm, 32mm tape is the correct choice. For narrower road rims (17–22mm internal width), a narrower tape (19–25mm) is more appropriate. Always check your rim’s internal width specification before ordering.

Do I need to apply two layers of rim tape?

For most applications, one layer is sufficient — including road racing at high pressures. Schwalbe’s tape is rated to 12 bar with a single layer. A second layer may help on rims with deep spoke holes or rough rim beds, but is generally not necessary.

How do I apply tubeless rim tape correctly?

Clean the rim bed with isopropyl alcohol and allow to dry. Start at the valve hole, press firmly as you work around the rim, and overlap the starting point by 5–10cm. Press the tape firmly into the rim bed and walls. Pierce the tape at the valve hole with a sharp tool, install the tubeless valve, and allow the tape to bond for at least 30 minutes before inflating.

Is this tape compatible with all tubeless valves?

Yes — compatible with all standard tubeless valves including Schwalbe, Stan’s NoTubes, DT Swiss, Muc-Off, and others. The valve’s base flange seals against the tape to create an airtight seal.

How many wheel builds does a 10m roll cover?

Approximately 5–6 complete wheel builds (both wheels) depending on rim diameter and layers. For a 29" MTB wheel with a single layer, you need approximately 2.2–2.4m per wheel.

Can I use this tape on non-tubeless-ready (standard) rims?

Schwalbe’s tape is designed for tubeless-ready (TLR) rims with a sealed rim bed and single valve hole. Standard rims with multiple spoke holes are very difficult to seal reliably. For best results, use with a purpose-built TLR rim.

What sealant should I use with this rim tape?

Compatible with all tubeless sealants. Schwalbe recommends their own RevoSealant for optimal results. Stan’s NoTubes, Orange Seal, and Muc-Off No Puncture Hassle are also fully compatible. Use approximately 60–80ml per MTB tyre and 40–60ml for road/gravel.

How long does tubeless rim tape last?

When correctly applied to a clean rim, typically 2–3 years or through multiple tyre changes. Replace if you notice air loss that can’t be attributed to the tyre or valve, visible lifting or bubbling, or tape that tears when removing a tyre.

Schwalbe Tubeless Rim Tape – 10m x 32mm, Blue, max. 12 bar