The Scarosso is set apart from the competition by its leading-edge; attributed to the Scarosso AID (Aerodynamic-Identity) Fork. CFD Analysis indicate turbulence regions present at the chainwheel, caused by the cadence of the rider, resulting in parasitic drag.
Scarosso frame is designed and optimised in such a manner, that it passively guides airflow over critical combination bike/rider extremities as a unit. The handle bar for example optimises airflow over the rider's knee area behind it and the downtube over the feet and crank areas.
Scarosso is manufactured in a tailored process and layup schedule. Constructed through expanded polystyrene (EPS) moulding. Preform moulding allows precise, uniform (wrinkle-free) and repeatable execution of the lay-up schedule. Uniform fibers increase strength reducing irregularities.
Scarosso geometry places the rider in the optimal position for power transfer to the pedals while riding in the most aero efficient posture. This position is then ergonomically enhanced and fine tuned for a good balance of aerodynamic efficiency, comfort and performance.
Sram AXS, Shimano Di2 and Campagnolo EPS compatible
The Aero Drop Handlebar is designed complementary to aerodynamics of the Scarosso frameset. Downforce inducing profile handlebar tops. Compact bend for palm comfort in the drops. Light UD carbon structure, with 3K Twill Weave surface finish. Full- or Semi- Integrated brake, gear and electric cable routing. The handlebar has a reach of 82mm and drop of 124mm Drops are flared at 3.5° for improved wrist ergonomics promoting comfort over prolonged periods.
Scarosso AID Fork reduces parasitic drag by implementing the Tubercle Effect, a phenomenon where ‘bumps’ are placed on the leading edge of an aerofoil to improve the aerodynamic flow.
Scarosso design and engineering focused on reducing the interference drag, present between the frame and components. The cable routing is fully internal, only exposed at the exit of the respective component. The stem is recessed into the top tube, inducing the minimum air disturbance. Aerodynamic advances include the top tube and down tube aerocurves, that guide the airflow over the profiles. The front and rear wheel are tucked close to the frame, to induce smooth air transition between components.
This Scarosso is fitted with a quality Surface Carbon 40mm deep dish carbon wheels built on DT Swiss 240 hubs. Surface wheels are lightweight and crosswind control compliant, the Surface Elite 40 D is made from 3K Twill weave Toray carbon Fiber, delivering an impact resistant, stress dissipating wheel that is very stiff. Vittoria Rubino Pro 700 x 28C provides excellent grip and super low rolling resistance as well as doing a great job of stopping you when you pull the Shimano ST-R8070 Hydraulic disc brakes.
Front and rear thru axle dropouts makes wheel removal very quick and greatly stiffens up the frame and fork for both improved steering and power transfer to the rear wheel. The thread on both front and rear dropouts are interchangeable
Scarosso's seatpost is a thing of beauty. This highly-aero mast is securely locked in place with an integrated seatclamp.
SILV-SCAR-RD Scarosso is UCI approved and accredited. "all new models of frames and forks used by licence holders in road (RD), time trial (TT), track (TR) and cyclo-cross (CX) events must be approved on the basis of the Approval Protocol for Frames and Forks available from the UCI website. Approval by the UCI certifies that the new equipment meets the shape requirements set out in the UCI regulation. The use of approved models is permitted in competition from the date of approval. The use of approved frames and forks remains subject to Article 1.3.007"
|Crankset||Shimano Ultegra FC-R8000, Double, 11spd, Hollowtech, 53/39t|
|Cassette||Shimano Ultegra CS-R8000, 11-32t|
|Front Der||Shimano Ultegra Di2 FD-R8050|
|Rear Der||Shimano Ultegra Di2 RD-R8050-GS Shadow, 11spd|
|Bottom Bracket||FSA PF30 w/24mm adaptor for Shimano|
|Fork||Scarosso AID Passive Aerodynamic Control, Matte 3K Twill Finish, 100x12mm|
|Headset||SURFACE Sealed Bearings, ZS56/40 Top and Bottom|
|Hubs||DT Swiss 240 Hubs, Centrelock, T/A front and rear|
|Rims||Surface Carbon 40mm,700C F:20, R:24H|
|Tyres||Vittoria Rubino Pro|
|Seatpost||SURFACE 3K Twill Carbon, 360mm|
|Saddle||SURFACE Ti-Alloy Rails|
|Handlebar||SURFACE 3K Twill Carbon, 31.8mm Clamp, 124mm Drop, 82mm Reach, 4° Flare|
|Stem||SURFACE UD Carbon, Full Control System Integration, 75/90/105/120mm, 6.5° Rise|
|Frame||Scarosso Carbon Frame, Passive Aerodynamic Control, Matte with 3K Twill finish, 100x12mm Front and 142x12mm Rear|
|Brake set||Shimano ST-R8070, Hydraulic Disc Brake, Dual Control Lever, 11-spd|
Disclaimer: Due to the nature of bike manufacturing, specification, finishes and price may be subject to change without prior written notification.
Disclaimer: Due to Covid-related scheduling and component availability challenges, bike specifications are subject to change without notice. Specifications may not be exactly what is shown in the photo.